The Easy1541 cable

Description

The Easy1541 cable is a cable that connects Commodore drives to Amigas. It's compatible with all Commodore drives and clones that have the usual serial bus port.

Hardware requirements

You need the following hardware to make use of this cable:

Software support

The cable is supported by the following Amiga software:

Construction

You can find the details on how to build this cable at the construction page.

Pictures

The assembled cable looks like this: complete cable, parallel plug at PC end, DIN plug at Commodore end.

These pictures should give you an overall idea on how the cable looks like and how it should be properly assembled. However, when building a cable yourself, you should not rely on the pictures only; see the construction guide instead.

Usage

Connect the serial plug into the serial port of your Commodore drive. Connect the parallel plug into the parallel port of your Amiga.

Important! Do not plug or unplug cables while your equipment is switched on. Make sure that all components of your equipment are connected to the same, properly grounded power outlet. Put your equipment far away from monitors, TV sets and other devices with strong emission, otherwise cables may pick up interference and you may experience data loss or corruption.

Copyright and license

The Easy1541 cable is © by Fabrizio Farenga, 1996.

Contact | Copyright and license | Blog page | Recent updates | Title page
(This page best viewed with any browser)